MacBook lid skinA precision-cut vinyl skin for the lid of your MacBook. Full coverage, edge to... Read More
MacBook lid skin
A precision-cut vinyl skin for the lid of your MacBook. Full coverage, edge to edge, with a 2 mm margin inside the edge on all sides so nothing catches or lifts when the lid opens and closes. Choose your design, choose your size, and change the look of your machine in about two minutes - no case, no bulk, nothing to click on or off.
The skin covers the entire lid surface, including the Apple logo. If you'd rather keep the logo visible, this isn't the product for you.
Find your size
Sizes in the dropdown are the actual dimensions of the skin in millimetres (width x height). To find yours, turn your MacBook over and read the small text along the bottom edge of the underside - you're looking for a code beginning with "A", like A2681. Match it below:
300 x 208 mm - MacBook Air 13.3" 2018-2020 incl. M1 (A1932, A2179, A2337) / MacBook Pro 13" 2016-2022 incl. M1 and M2 (A1989, A2159, A2251, A2289, A2338)
300 x 211 mm - MacBook Air 13.6" M2-M4, 2022 onwards (A2681, A3113, A3240)
309 x 217 mm - MacBook Pro 14" M1-M4, 2021 onwards (A2442, A2779, A2918, A3112)
336 x 234 mm - MacBook Air 15.3" M2-M4, 2023 onwards (A2941, A3114, A3241)
352 x 244 mm - MacBook Pro 16" M1-M4, 2021 onwards (A2485, A2780, A2991, A3186)
Can't find your model? If your A-number isn't in the list above, or you can't read it, please contact our customer service before ordering - tell us your model and year and we'll confirm exactly which size you need. Better a quick message than the wrong size in the post.
Details
Lid only - one piece, covering the top surface of the closed lid
Cut 2 mm inside the edge on all sides - sits flush, no overhang, nothing to peel from the corners
Rounded corners matched to your model - follows the shape of the lid, not a rectangle over it
Covers the Apple logo - no cutout
Ultra-thin vinyl - adds no measurable thickness, so the lid still closes flush and fits any sleeve or bag
Air-release adhesive - reposition it while you apply, and push bubbles out instead of trapping them
Removable - lifts off cleanly without residue, so you can change the design or return the machine to standard
Scratch- and scuff-resistant finish - takes the daily wear that would otherwise land on the aluminium
Model not listed? - contact our customer service and we'll help you find the right size
How to apply
Close the lid and clean the surface - wipe it down, let it dry fully, and lift off any dust with tape or a lint-free cloth.
Peel back a few centimetres of the backing and line the top edge up with the lid, leaving an even margin on both sides. Don't press down until it's straight.
Press the top edge down, then pull the backing away gradually while smoothing outward from the centre with your thumb or a cloth.
Any small bubbles left over will work out to the nearest edge with light pressure.
